RapNet 06 Download & Installation Instructions

1. Click the button below to start downloading the setup file.
2. In the "Save As" Dialog box, select the location where you would like to save the setup file.
3. Once download is complete, run the 'RapNet 06.exe' setup file from the location where it was saved.
4. Carefully follow the instructions in the RapNet 06 Setup Wizard. Note: If you already have RapNet '99 installed, you will be required to uninstall it prior to installing the new RapNet 06.
5. Important! After the installation is complete, you might have to change your Microsoft Microsoft Excel security settings in order to activate the Macros required for RapNet 06. Follow these steps to set up your Microsoft Excel program security settings:
   1. Open your Microsoft Excel Program.
   2. From the program menu at the top, Click 'Tools', then 'Options.'
   3. In the Options Panel, select the 'Security' tab and click the 'Macro Security' button.
   4. In the Macro Security window, select 'Low' or 'Medium'* and click 'OK.'
   5. Click 'OK' again in the options window to save your settings.
6. Congratulations! You now have RapNet 06 set up and ready to use.

* Choosing the 'Medium' setting in your Microsoft Excel Macro Security settings will cause Microsoft Excel to prompt you to Enable Macros each time you run RapNet 06. In order for RapNet 06 to function, Macros MUST be ENABLED.

Attention! It is strongly recommended to read the Download & Installation instructions above thoroughly and carefully before you begin the download process.

Troubleshooting

Problem: The new RapNet 06 toolbar does not appear in the Microsoft Excel worksheet
(or the previous RapNet '99 toolbar is displayed instead of the upgraded RapNet 06 toolbar).

Solution: Follow these steps to enable the RapNet 06 Microsoft Excel Add-in:

1. Open your Microsoft Excel Program, and from the top program menu, click 'Tools', then 'Add-Ins.'
2. In the Add-Ins window, click 'Browse' and locate your RapNet 06 folder (Default: 'C:\Program Files\RapNet 06').
3. Select the 'RapNet06.xla' file inside your RapNet 06 folder, and click 'OK.' 'RapNet06' Add-In will be added to your Microsoft Excel Add-Ins list.
4. Click 'OK' in the Add-Ins window to save your setting.
5. That's it! Now close your Microsoft Excel window and start RapNet 06 normally.

For information, questions, feedback or to report program errors (bugs),
please contact us at: rapnet06@diamonds.net

back to RapNet 06 Intro Page »